Free mic stand! While supplies last, receive a free A-379 microphone stand when you purchase any microphone over $199 from Kelly’s Music & Computers! (Offer valid only in the US, lower 48 states. Not valid in Canada or outside the US. While supplies last.)
- All-in-One 16:4:2 Digital Mixing solution
- I/O and Mixer components can be flexibly separated up to 50m apart
- Single CAT-5 cable - no heavy and expensive multicore snake required
Overview
Offering all the mixing flexibility, functionality and I/O of the LR16 (without the 16-track multitrack recording feature) the LM16 version could just be the best tool for those wanting a flexible, all-in-one, high quality livesound digital mixing / multicore solution.
Real ‘Knobs and Faders’ Digital Mixing - Full Compliment I/O
Using an LM16 holds no surprises. Each of the 16 channels features a balanced mic and line inputs (XLR/TRS Combo), phantom power, digitally controlled TRIM and analog LIMITER, 3-band EQ with swept mid frequency, no less than 3 AUX sends, digital effects and level. And as all these controls are accessed by physical knobs and faders just like an analog mixer, using an LM16 does not require a steep learning curve.
No Expensive Bulky Multicore Snake - Rack Mount or Free Standing
Just like the LR16, connecting the Mixer and I/O components is a single ‘off-the-shelf’ CAT-5 cable which can be up to 50m (164 ft) in length. In addition, the two LM16 components can used free-standing, bolted together or mounted in standard 19-racks with the included fitting kits. This makes the LM16 great for HOW, clubs, schools and coffee houses, where a quick set-up and flexible installation are paramount.
Inituitive 'Analog' Style Mixing
Mixing with an LM16 is intuitive and simple as it is a real ‘knobs and buttons’ mixer. Each of the 16 channels features balanced mic and line inputs (XLR / TRS Combo), phantom power, digitally controlled TRIM and analog LIMITER, 3-band EQ with swept mid frequency, no less than 3 AUX sends, digital effects and level. And as all these controls are accessed by physical knobs and faders just like and analog mixer, using an LR16 does not require a steep learning curve.
No Expensive, Bulky Multicore Snake
Connecting the LM16 Mixer and Recorder I/O components is a single ‘off-the-shelf’ CAT-5 cable which can be up to 50m (164 ft) in length. This means it’s great for HOW, clubs, schools and coffee houses where a quick set-up and easy installation are paramount.
Rack Mount Operation
The two LM16 components can be used free-standing or mounted in standard 19-racks with the included rack ear kits. In addition, the mixer and recorder I/O section can be used as a conventional MTR device – as a kit, also included, to bolt the two components together making one, integrated mixer / recorder unit.
In Detail
- I/O and Mixer components can be flexibly separated up to 50m apart
- Single CAT-5 connecting cable - no heavy and expensive multicore snake required
- Stand-alone or mount in 19-rack
- Intuitive analog-like mixer with 16 input faders, 4 group bus faders and master faders
- Individual balanced mic and line inputs (XLR / TRS Combo) with phantom power
- Digitally controlled TRIM with analog LIMITER on all 16 channels
- 3-band EQ with swept-mid frequency on all 16 channels
- Built-in Digital Mastering Effects (Reverb/Delay)
Specifications
Input and Output (Main Unit)
0dBu = 0.775Vrms, 0dBV = 1.0Vrms
Microphone Input (1 ~ 16)
Connectors: XLR 3-31, balanced (combo)
Nominal input level: -60dBu ~ -12dBu
Input impedance: more than 1.5kOhm
Phantom power: P48V (1~8CH & 9~16CH switchable, on/off)
Line Input (1 ~ 16)
Connector: Ø6.3mm TRS Phone, balanced (combo)
Nominal input level: -40dBu ~ +8dBu
Input impedance: more than 10kOhm
Insert (1 ~ 8)
Connector: Ø6.3mm TRS Phone (Tip: Out, Ring: In)
Load Impedance: more than 10kOhm
Nominal output level: -10dBV
Input impedance: more than 10kOhm
Nominal input level: -10dBV
Stereo Bus Out (L, R)
Connector: XLR 3-31, balanced
Reference output level: +4dBu
Load impedance: more than 10kOhm
Group Bus Out (1 ~ 4)
Connector: Ø6.3mm TRS Phone, balanced
Reference output level: +4dBu
Load impedance: more than 10kOhm
AUX Send (1 ~ 3)
Connector: Ø6.3mm Phone, unbalanced
Reference output level: -2dBu
Load impedance: more than 10kOhm
Effect Send
Connector: Ø6.3mm Phone, unbalanced
Reference output level: -2dBu
Load impedance: more than 10kOhm
Reference output level: -10dBV
Load Impedance: more than 10kOhm
Footswitch - LR16 Only
Connectors: Ø6.3mm Phone
Stereo Mix Out (L, R) - LM16 Only
Connector: RCA unbalanced
Reference output level: -10dBV
Load Impedance: more than 10kOhm
USB (Host) USB2.0 Hi-Speed for Storage connection
Connector: A type
Connector: A type
MIDI Out
Connector: DIN 5-pin
To Control Box
Connector: RJ45 (CAT5, straight)
Input and Output (Controller)
Phone
Connector: Ø6.3mm Stereo Phone
Load Impedance: more than 32Ohm
Monitor Out (L, R)
Connector: Ø6.3mm Phone, unbalanced
Reference Output Level: -12dBV
Load impedance: more than 10k Ohm
Sub In (L, R)
Connector: RCA, unbalanced
Reference input level: -10dBV
Input impedance: more than 10kOhm
To I/O Box
Connector: RJ45 (CAT5, straight)
General
Dimensions: 482 (W) x 136 (H) x 570 (D) mm
Weight: 10kg
Power requirement: JPN 100VAC, USA 120VAC, UK/Eur 230VAC
Power consumption: 20W
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now? Try our on-line chat, or
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
Mics, Mixers & Pre-Amps
