GuitarJack Model 2 is a high quality audio interface that connects a wide range of instruments, microphones, and other audio hardware to the iPhone 4, iPad 2, iPad, and iPod touch (3rd and 4th generation) via 1/4 inch instrument and 1/8 inch stereo mic/line inputs. GuitarJack's dedicated 1/8-inch stereo analog line/headphone output offers increased drive for headphones.
GuitarJack Advantages
GuitarJack has several advantages over other device powered dock connecting audio accessories, including stereo mic/line-input, configurable Hi-Z or Lo-Z 1/4" instrument input, simultaneous instrument and microphone recording with both inputs when used with apps like FourTrack and StudioTrack that support those features, software controllable input level control with 60 dB of gain plus 12 dB pad for 72 dB of adjustment, stereo line out/headphone jack with more drive than the iPhone built-in headphone jack, a 24-bit AD/DA converter, and the highest quality sound.
What You Can Do with GuitarJack
- Connect a wide range of instruments, microphones, and other audio hardware to the iPhone, iPad and iPod touch via 1/4 inch instrument and 1/8 inch stereo mic/line inputs.
- Record in mono, stereo, or simultaneously record your voice and instrument on separate tracks using GuitarJack with Apps like FourTrack and StudioTrack.
- Jam to the GuitarTone amps and effects App and the song tool in FourTrack and StudioTrack. More GuitarTone amps and effects enabled free while GuitarJack is connected. Also works well with most third party audio apps like GarageBand.
- Enhance the sound of your guitar with Taylor EQ, optimized for use with Taylor guitars and GuitarJack.
- Listen to music using the stereo output on GuitarJack, which has increased drive for headphones.
Hardware Features
- 1/4 inch (6.5 mm) instrument input - nickel-plated solid brass Switchcraft (10,000 MTBF) jack
- 1/8 inch (3.5 mm) stereo mic/line input - (no phantom power is provided)
- 1/8 inch (3.5 mm) stereo headphone/line output with increased drive for headphones
- Dock connector designed for use without removing most cases
- Device powered for ultimate portability - requires no batteries or power adapter
- GuitarJack Model 2 includes a 24-bit AD/DA converter, however only 16-bit audio playback and recording is currently possible until a firmware update becomes available. More about 24-bit
- Sleek and rugged aluminum shell
Software Features
(Control Panel in GuitarTone, FourTrack, StudioTrack & TaylorEQ)
- Level Control: 60 dB of continuous level control
Input Modes:
- Instrument (1/4 inch) - mono - Pad, Lo-Z or Hi-Z mode
- Mic/Line (1/8 inch) - mono, dual-mono or stereo - Pad, Normal or Boost mode
- Both inputs - Mic/Line input on the right channel and Instrument on the left channel
Included Software:
- GuitarTone and TaylorEQ are available free
- GuitarJack enables additional amps and effects in GuitarTone, FourTrack, and StudioTrack while connected
Requirements
- GuitarJack Model 2 is compatible with iPhone 4, iPad 2, iPad, iPod touch (3rd and 4th gen.) iPod touch 2nd gen.
- GuitarTone requires iOS 4.2 or later, iPhone 4, iPhone 4S or iPod touch (4th generation)
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now? Try our on-line chat, or
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
Sound Cards
