10" Speaker. 2 Way, Self Powered, 2 Amp, Bass Reflex
KETRON PA System Components
The KETRON P.A.’s light weight, small dimension, bi-amplification speaker system design makes it easy to set up, extremely portable, and flexible. This makes the Ketron P.A System suitable for numerous applications, such as:
- Musical performances
- D.J. setup
- Conference, congress, and lecture hall use
- General purpose speaker system
KETRON Speakers are designed to deliver excellent, powerful sound quality in any environment.
By adding one or more self-powered subwoofer’s from the SK series you can reinforce the lower frequency range to maintain a high level of acoustic pressure across the entire spectrum, thus making the KETRON P.A. a superb choice for use in large open spaces or outdoor performances.
POWER SPEAKER MB-10
The MB10 is a 250 +50 watt (RMS) 2-ways power speaker with a 10 inch woofer and an elliptic 1 inch horn, delivering a warm and clear sound.
Equipped with a class D switching amplifier (icepower® by Bang&Olufsen ICE POWER), the MB10 delivers an extremely flat frequency response and stunningly accurate sound reproduction, even when pushing the system to the limit.
The body of the case is constructed of multilayered wood allowing for a warmer sound and a lighter weight. The trapezoidal design makes it possible to position it vertically or horizontally, like a monitor.
Electronic Components:
- The speaker provides one Neutrik Combo ® balanced input that accepts XLR as well as ¼ inch jacks
- LINK balanced XLR output for parallel connectivity to another system
- Microphone input connector with independent volume control and 3 band E.Q. +/- 8db
- A digital S/PDIF input permits connection to a digital mixing console or other device for pure sound without any loss in sound quality.
SUBWOOFER SK 12 A
The SK 12A is a 450 W (RMS) long course 12 inch sub-woofer that provides a powerful sound in the low frequency range (30-100Hz). It uses a class D IcePower® switching amplifier by Bang & Olufsen ICE POWER and boasts a sophisticated protection system that minimizes the risk of power shortage while maintaining normal functioning even if the electricity supply is uneven.
The SK 12A can be used in both an enclosed indoor environment and an open outdoor environment.
To enhance the impact of the low frequencies, an auxiliary output has been provided to connect it to an external passive subwoofer SK 12.
Specifications
System Format
Two-way, self powered, two amplifier, bass reflex
Frequency Range
40 Hz – 20 kHz
Sensitivity (1W-1m)
99 db
SPL Max
125 db
Crossover Frequency
2 kHz
Crossover Type
Electronic 24 db/octave
Woofer
10”
Mid-Hi
1”
Power Out
250w RMS woofer + 50w RMS horn ICEpower®
Conncections
Combo (ine in) balanced XLR (mic in, Line out) RCA (S/PDIF)
Controls
Mic Volume, Master Volume, Bass Mid-Hi controls, +/- 8 db Left – Right switch, GND/LFT switch
AC Voltage
120v – 60 Hz
Construction
15mm Plywood
Weight
37.5 lbs / 17 kg
Dimensions
H x W x D
18.9” x 13.4” x 12.6”
480mm x 340mm x 320mm
Specifications and appearances are subject to change without notice.
No questions available - feel free to add yours below!
Have a question? Our tech specialists are here to help you and
usually respond on the same business day!
Want answers now? Try our on-line chat, or
call 1-800-510-4385. (Our average hold time is less than 15 seconds!)
Already own this product?
Get tech support.
Speakers & Headphones
